Shutter Repair – Common issues and fixes Manoj April 19, 2023
Shutter Repair – Common issues and fixes
Shutter Repair

Shutter Repair – Roller shutters are an essential component of many homes and businesses, providing security, insulation, and privacy. However, like any mechanical device, they can encounter problems over time.

In this blog, you’ll acknowledge some important concerns about shutters, especially rolling shutters and how they can be repaired. However, like any mechanical device, roller shutters can encounter problems over time. These problems may be due to wear and tear, poor maintenance, or incorrect installation. It is essential to identify these problems early on to prevent any further damage or safety hazards. We’re going to look at the typical causes of roller shutter repairs and how to get yours mended. 

Roller shutter repair – common problems

Roller shutters can malfunction for a number of different causes. It’s crucial to know how to react when anything goes wrong in order to either remedy the situation or at the very least keep it from getting worse. It’s frequently required to hire an expert to handle complex repairs, as we’ll discuss below. But in the meantime, here are some typical issues with roller shutters that you might encounter:

  • A Buildup of Dirt and Debris
  • Structural Damage to Shutter Door
  • Stuck or jammed shutters
  • Noisy operation
  • Overheating
  • Damaged or Broken Slats
  • Motor Failure
  • Wear and tear

How can you Fix these Shutter Problems?

While it’s important to have a professional technician handle severe or complicated issues with roller shutters, there are some common problems you may be able to fix yourself. Here are a few examples:

  • A Buildup of Dirt and Debris – If you let dirt and debris accumulate in your shutter, the issue will eventually show. The door will start to move and operate less smoothly, and it can even stop moving altogether. The dirt should be removed with a hard brush, and grease can be used to make the door easier to move.
  • Structural Damage to Shutter Door – If there is any structural damage to your roller shutter’s door, it may not function properly. Therefore, it’s important to inspect the door for any signs of damage if you’re experiencing issues
  • Stuck or jammed shutters – If your roller shutters are stuck or jammed, it could be due to a damaged guide rail, misaligned slats, or a malfunctioning motor or control mechanism. To fix this, try cleaning the tracks first. If that doesn’t work, check the cable and motor for damage.
  • Noisy operation – If your roller shutters make a lot of noise when opening or closing, this could be due to loose or worn parts, misaligned tracks, or a lack of lubrication.
  • Overheating – If your roller shutter is constantly in use, it may become too hot and overheat. Allow some time to pass before attempting again.
  • Damaged or Broken Slats –  Slats can become damaged or broken due to impact, weathering, or general wear and tear. To replace them, remove the damaged slats and slide the new ones into place.
  • Motor Failure – If the motor fails, the shutters will stop working altogether. Check the power supply and wiring to make sure everything is connected correctly.
  • Wear and tear – Exposure to the elements can cause roller shutters to get dented or cracked, leading to rail misalignment and potential issues with movement.

It is advised that you have your roller shutters inspected and serviced on a regular basis. So, you’ll be able to identify and address problems sooner and get the technical part in check.

So if you are looking for a roller shutter repair? You’ve come to the right place. 

At 24 Shutter Repair, we specialize in providing high-quality roller shutter repair services and shopfront installation in London. Our expertise covers both electric and manual roller shutters, and we offer emergency repair services as well to keep your roller shutters in check. So what are you waiting for, contact us today.