With time, the Roller Shutters get dirty and stained. When you clean them daily, it will restore its appearance and looks pretty. The Roller Shutters do not need much maintenance and if you do clean it regularly, it will reduce the cost of maintenance. Here we are telling you the ways to clean the Roller Shutters and you can use this as a guide that will help you to clean your Roller Shutters effectively.
Remove debris and dust from the Roller Shutter
First, you need to clean all the dust and debris from the Roller Shutters. This step is important as the Roller Shutters are painted and small dust particles is attracted towards the paint. These dust particles are slowly increased and if not cleaned can result in scratches. This is important because it ensures the dirt and dust to clean. Also remember that do not run down the Roller Shutters when they are wet and this can result in cracks and crevices which are difficult to remove.
Wipe down the surface with warm water and a mild detergent
To remove the stains, debris and dirt, you must use a mild cleanser like dish soap along with warm water. With a clean cloth you need to wipe the complete surface of the Roller Shutters. Make sure no spots are missed out. While cleaning, apply medium pressure on the Roller Shutters surface. Use a scrub to detach the hard spots and strains where there is excess debris or dirt. After that, clean the entire surface again. Use water and detergent on the entire surface and clean the Roller Shutters in an up-and-down motion.
Spray the Roller Shutters and use a soft brush for guides
Now, you need to clean the Roller Shutters between guides. Firstly, you need to use a soft brush and then gently clean the guides, dislodging the lint, debris, and dust. Once you done with this, you need to wipe down the guides with the lukewarm water. After cleaning, allow the guides to make sure they are dry before you lower down the shades.
Wipe down the surface with clean water and let it dry
First, you need to use clean water to remove the debris or use soap to wipe away the interior or exterior surface of the Roller shutters. This way the dirt will be cleaned properly. After this, you need to use a clean towel or cloth to mop down the entire Roller Shutters surface properly. This way all the dirt and impurities will be detach along with moisture, which prevents dirt and dust from settling on the newly cleaned Roller Shutters.